Open Flash XDF's
Anyone have the off the shelf XDF's? Would like to play with porting some things over to my Cobb maps. @jpsimon Thanks
View ArticleClik here to view.
Vargas Vendor Review - Stage 0 Replacement Turbos (No dyno.)
With 48k on the clock the OEM turbos died shortly after dialing up the boost to 19 PSI. It was time for replacements, but I wasn't ready to sink the cash into a twin scroll, going the economical route...
View ArticleFirst time to the track this season 12.3@115 in 335xi AT
Finally got some time to go to the track this year and unfortunately its been really hot an humid this past weekend but was able to go to Union Grove, IL and get some runs in at Great Lakes Dragaway....
View ArticleSiemens Sensor used in Procede FlexFuel
Hello, can anyone with the Procede flexfuel kit let us know the part number from the Siemens sensor they're using?
View ArticleOpen Flash OTS Boost 18 psi STOCK HARDWARE?
So people on e90post are drooling over the numbers made on stock hardware. The numbers are impressive but they are running 18 psi which to me seems very aggressive on stock hardware. Of course we would...
View ArticleWhere can I buy male-male methanol compression fitting?
Sprung a leak right where the 6mm AM hose enters the engine bay, by my catch can. Is anything available similar to subject fitting?
View ArticleFor Sale: New Samsung Galaxy S4 zoom-$330, BlackBerry Z10-$350, HTC Desire...
MARTECH LIMITED we are one of the leading mobile phone distributorsis. We are Legitimate registered company under government registration and licensed, Registered No.06718845 We are recognized...
View ArticleClik here to view.
Cobb Pro-tune help
Hey guys, I posted this on the other forum too. I dropped my car off at Cobb Plano last week to have my RBs installed and get a Pro Tune, and picked it up on Saturday. I didn't get to drive it much on...
View Article07 with a bunch of problems please help
I just got this car on a trade and i love it but it has issues that are a little more deep than what i was told. I do have a lot of mechanical knowledge but its mostly with diesels. I have done a ton...
View ArticleClik here to view.
Lets talk about METH
Started a similar thread on Terry's forum but because bimmerboost has one of the biggest and probably best communities I want to get as much ammunition as I can. I want to get some more info on running...
View ArticleClik here to view.
First time to the track with RB's
I was recently able to get the car out for some 1/4 testing with the RB's and she ran really well! The track was being very "slick car" bias for some reason and I was only able to get two passes in...
View ArticleHow Many of You Have Changed O2 Sensors?
And what mileage? Did you change front and rears? Any defining attribute in logs? I think I may have a lazy O2 sensor... It's been rumored that the rears do influence trimming control, and this is...
View ArticleOpen Flash XDF's
Anyone have the off the shelf XDF's? Would like to play with porting some things over to my Cobb maps. @jpsimon Thanks
View ArticleClik here to view.
Vargas Vendor Review - Stage 0 Replacement Turbos (No dyno.)
With 48k on the clock the OEM turbos died shortly after dialing up the boost to 19 PSI. It was time for replacements, but I wasn't ready to sink the cash into a twin scroll, going the economical route...
View ArticleFirst time to the track this season 12.3@115 in 335xi AT
Finally got some time to go to the track this year and unfortunately its been really hot an humid this past weekend but was able to go to Union Grove, IL and get some runs in at Great Lakes Dragaway....
View ArticleSiemens Sensor used in Procede FlexFuel
Hello, can anyone with the Procede flexfuel kit let us know the part number from the Siemens sensor they're using?
View ArticleOpen Flash OTS Boost 18 psi STOCK HARDWARE?
So people on e90post are drooling over the numbers made on stock hardware. The numbers are impressive but they are running 18 psi which to me seems very aggressive on stock hardware. Of course we would...
View ArticleWhere can I buy male-male methanol compression fitting?
Sprung a leak right where the 6mm AM hose enters the engine bay, by my catch can. Is anything available similar to subject fitting?
View ArticleI need HELP near West Virgina (Morgantown)
Well to make a long story short, picked up the new shop car had a blast at bimmerfest and started the trek back today. Got 500 miles or so out and the water pump took a $#@! on me. Barely makes any...
View ArticleClik here to view.